Conference Publications

  1. V. Sangwan, R. Kumar, A. Rathore, “State-of-Charge Estimation for Li-Ion battery using Extended Kalman Filter (EKF) and Central Difference Kalman Filter (CDKF)”, 52nd IEEE Industry Applications Society Annual Meeting, Cincinnati, USA, October 1-5, 2017
  2. A. Shukla, K. Verma, R. Kumar, “Multi-Stage Voltage Dependent Load Modelling of Fast Charging Electric Vehicle”, 6th IEEE International Conference On Computer Applications In Electrical Engineering-Recent Advances (CERA-2017), Rookie, India, October 5-7, 2017.
  3. S. Choudhary, C. Prakash, R. Kumar, “A Hybrid Approach for Gait based Gender Classification using GEI and Spatio Temporal parameters”, 6th International Conference on Advances in Computing, Communications and Informatics (ICACCI- 2017), Manipal, India, September 13-16, 2017.
  4. O. J. Shukla, G. Soni, R. Kumar, “Modeling and simulation of agent’s structure for a manufacturing system using SimEvents”, 2nd International Conference on Recent Advancements in Computer, Communication and Computational Sciences (RACCCS- 2017), Ajmer, India, September 2-3, 2017.
  5. V. Gupta, R. Kumar, S. Konda, B. K. Panigrahi, “Intelligent Traffic Light Control for Congestion Management for Smart City Development”, IEEE TENSYMP 2017 – Technologies for Smart Cities, Cochin, India, July 14-16, 2017.
  6. C. M. Baby, K. Verma, R. Kumar, “Short Term Wind Speed Forecasting and Wind Energy Estimation: a Case Study of Rajasthan”, International Conference on Computer, Communications and Electronics (COMPTELIX-2017), Jaipur, India, July 01-02, 2017.
  7. V. Sangwan, A. Sharma, R. Kumar, A. K. Rathore, “Optimal Parameter Estimation of Battery Model for Pivotal Automotive Battery Management System”, 17th IEEE International Conference on Environment and Electrical Engineering (EEEIC-2017), Milan, Italy, June 06-09, 2017.
  8. C. Prakash, Sujil A, R. Kumar, N. Mittal, “A Linear Prediction Model for Joint Movement of Lower Extremity”, Advanced Computing, Networking, and Informatics (ICACNI – 2017), Goa, India, June 01 – 03, 2017.
  9. A. Sharma, K. Gupta, A. Kumar, A. Sharma, R. Kumar, “Model based path planning using Q-Learning”, 2017 IEEE International Conference on Industrial Technology (ICIT 2017), Toronto, Canada, March 22-25, 2017.
  10. C. M. Baby, K. Verma, R. Kumar, “Short Term Wind Speed Forecasting Using Regression Based Methods”, IEEE International Conference on Telecommunication, Power Analysis and Computing Techniques (ICTPACT 2017), Chennai, India, April 06-08, 2017.
  11. A. V. Bole, R. Kumar, “Multidimensional 0-1 Knapsack using Directed Bee colony Algorithm”, IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (INCOS 2017), Srivilliputhur India, March 23 – 25, 2017.
  12. Sujil A, Sreenu S, J. Verma, R. Kumar, “Matrix Based Univariate and Multivariate Linear Approach Towards Short Term Load Forecasting”, IEEE International Conference on Electrical, Computer and Communication Technologies (IEEE ICECCT 2017), Coimbatore, India, February 22 – 24, 2017.
  13. O. J. Shukla, V. Jangid, M. M. Siddh, G. Soni, R. Kumar “Evaluating key factors of sustainable manufacturing in Indian automobile industries using Analytic Hierarchy Process (AHP)”, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS-2017), Allahabad, India, February 03-05, 2017.
  14. A. Kumar, A. Mittal, R. Arya, A. Shah, S. Garg, R. Kumar, “Hardware in The Loop Based Simulation of A Robotic System With Real Time Control and Animation of Working Model”, IEEE International Conference on Inventive Systems and Control (ICISC 2017), Coimbatore, India, January 19 – 20, 2017.
  15. C. M. Baby, K. Verma, R. Kumar, “Artificial Neural Network based Short Term Wind Speed Forecasting: a Case Study of Rajasthan”, 4th International Conference on Advanced Computing and Communication Systems (ICACCS -2017), Coimbatore, India, January 06 – 07, 2017.
  16. V. Kalkhambkar, R. Kumar, R. Bhakar, “Joint Optimal Sizing and Placement of Renewable Distributed Generation and Energy Storage for Energy Loss Minimization”, 4th International Conference on Advanced Computing and Communication Systems (ICACCS -2017), Coimbatore, India, January 06 – 07, 2017.
  17. V. Kalkhambkar, R. Kumar, R. Bhakar, “Analysis of Joint Optimal Allocation of Energy Storage and Renewable Distributed Generation for Energy Loss Minimization”, 2nd International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2016), Jaipur, India, December 23-25, 2016.
  18. C. Prakash, G. Takhar, R. Kumar, N. Mittal, “A Review on Background Subtraction Techniques and Applications”, 2nd International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2016), Jaipur, India, December 23-25, 2016.
  19. A. Shukla, K. Verma, R. Kumar, “Consumer Perspective based Placement of Electric Vehicle Charging Stations by Clustering Techniques”, 19th National Power Systems Conference (NPSC-2016), Bhubaneswar, India, December 19-21, 2016.
  20. S.Vyas, R. Kumar, R. Kavasseri, “Preemptive Mode-Change Triggering for Inverters in Response to Unintentional Islanding Situations in High Solar PV Penetration Distribution Networks”, IEEE International Conference On Power Electronics, Drives and Energy Systems (PEDES 2016), Trivandrum, India, December 14-17, 2016.
  21. V. Sangwan, A. Sharma, R. Kumar, A. Rathore, “Equivalent circuit model parameters estimation of Li-ion battery: C-rate, SoC and Temperature effects”, IEEE International Conference On Power Electronics, Drives and Energy Systems (PEDES 2016), Trivandrum, India, December 14-17, 2016.
  22. P. Goyal, A. Sharma, S. Vyas, R. Kumar, “Customer and Aggregator Balanced Dynamic Electric Vehicle Charge Scheduling in a Smart Grid Framework”, IEEE International Conference on Electrical Power and Energy Systems (ICEPES – 2016), Bhopal, India, December 14-16, 2016.
  23. R. Singhal, R. Kumar, “Receding horizon based greenhouse air temperature control using Grey wolf optimization algorithm”, 3rd IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics (UPCON 2016), Varanasi, India, December 09-11, 2016.
  24. S. Vyas, R. Kumar, R. Kavasseri, “Unsupervised Learning in Islanding Studies: Applicability Study for Predictive Detection in High Solar PV Penetration Distribution Feeders”, 3rd IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics (UPCON 2016), Varanasi, India, December 09-11, 2016.
  25. S. Konda, L. Panwar, B. K. Panigrahi, R. Kumar, “Optimal Scheduling of Uncertain Wind Energy and Demand Response in Unit Commitment using Binary Grey Wolf Optimizer (BGWO)”, 3rd IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics (UPCON 2016), Varanasi, India, December 09-11, 2016.
  26. A. Singh, S. Vyas, R. Kumar, “A Preliminary Study Towards Conceptualization and Implementation of a Load Learning Model for Smart Automated Demand Response”, 7th Power India International Conference (PIICON 2016), Bikaner, India, November 25-27, 2016.
  27. S. Pal, R. Kumar, “Comparative Analysis of Price Prediction Techniques for Residential Demand Response Programs”, 7th Power India International Conference (PIICON 2016), Bikaner, India, November 25-27, 2016.
  28. G. Singh, M. Siwasia, S. Vyas, R. Kumar, “Implementation of a Fuzzy Logic Based Perturb and Observe Approach for Maximum Power Point Tracking of Solar PV Modules”, 7th Power India International Conference (PIICON 2016), Bikaner, India, November 25-27, 2016.
  29. S. Jhajharia, C. Prakash, S. Verma, R. Kumar, “A Hybrid Clustering Model Based Approach for Prognostic Analysis of Breast Cancer”, International Conference on Recent Advancement in Computer, Communication and Computational Sciences (ICRACCCS-2016), Udaipur, India, November 25-26, 2016.
  30. C. Prakash, R. Kumar, N. Mittal, “Automated Detection of human Gait events from Conventional Videography”, IEEE International Conference on Emerging Trends in Communication Technologies (ICETCT 2016), Dehradun, India, November 18-19, 2016.
  31. V. Sangwan, A. Sharma, R. Kumar, A. Rathore, “Estimation of Optimal Li-ion Battery Parameters considering c-rate, SOC and Temperature”, 7th India International Conference on Power Electronics (IICPE 2016), Patiala, India, November 17-19, 2016.
  32. Sujil A, R. Kumar, “Smart Micro Grid Test System for Agent based Energy Management System”, 7th India International Conference on Power Electronics (IICPE 2016), Patiala, India, November 17-19, 2016.
  33. Om Ji Shukla, Sujil A, Gunjan Soni, R. Kumar, “Discrete Event System Framework for Analysis and Modeling of Job shop Scheduling System”, 5th International Conference on Advances in Computing, Communications and Informatics (ICACCI 2016), Jaipur, India, September 21-24, 2016.
  34. S. Jhajharia, H. Varshney, S. Verma, R. Kumar, “A Neural Network Based Breast Cancer Prognosis Model with PCA Processed Features”, 5th International Conference on Advances in Computing, Communications and Informatics (ICACCI 2016), Jaipur, India, September 21-24, 2016.
  35. S. Jhajharia, S. Verma, R. Kumar, “A Cross-Platform Evaluation of Various Decision Tree Algorithms for Prognostic Analysis of Breast Cancer Data”, International Conference on Inventive Computation Technologies (ICICT 2016), Coimbatore, India, August 26-27, 2016.
  36. C. Prakash, G. S. M. Thakur, Natasha, R. Kumar, “UMEED- A Fuzzy Based System in Law for Domestic Violence against Women”, International Conference on Computer, Communication and Computational Science (ICCCCS- 2016), Ajmer, India, August 12-13, 2016.
  37. S. K. Bishnoi, R. A. Gupta, R. Kumar, “No Load Robustness Analysis of AI Based Controllers and Estimators for SRM Drive”, International Conference on Advances in Information Communication Technology and Computing (AICTC2016), Bikaner, India, August 12-13, 2016.
  38. H. Varshney, A. Sharma, R. Kumar, “A Hybrid Approach to Price Forecasting Incorporating Exogenous Variables for a Day Ahead Electricity Market”, International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), Delhi, India, July 4-6, 2016.
  39. V. Sangwan, A. Sharma, R. Kumar, A. K. Rathore, “Estimation of Battery Parameters of the Equivalent Circuit Models using Meta-Heuristic Techniques”, International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), Delhi, India, July 4-6, 2016.
  40. S. Pal, R. Kumar, “ Effective Load Scheduling of Residential Consumers Based on Dynamic Pricing with Price Prediction Capabilities”, International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), Delhi, India, July 4-6, 2016.
  41. J. Choudhary, S. Pal, V. S. Pareek, R. Kumar, “Assessment of EV and ESS Performance Based load Scheduling in Smart Home”, International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), Delhi, India, July 4-6, 2016.
  42. Sreenu S, J. Verma, Sujil A, R. Kumar, “Matrix Based Univariate And Multivariate Linear Approach Towards Long Term Electrical Load Forecasting”, International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), Delhi, India, July 4-6, 2016.
  43. S. Reddy, S. Goutham, R. Kumar, B. K. Panigrahi, L. Panwar, “Optimal Wind Energy Scheduling in Smart Grid under Volatile Resource and Market Price Conditions”, International Conference on Recent Trends In Engineering and Material Sciences (ICEMS-2016), Jaipur, India, March 17-19, 2016.
  44. Siva N. Raju, S. Reddy, R. Kumar, L. Panwar, “V-Trough Concentrator with Integrated Cooling for Performance Enhancement of Rooftop PV in Arid and Semi-Arid Regions of INDIA”, Perspectives in Science, Elsevier. (In Press)
  45. C. Prakash, A. Mittal, S. Tripathi, R. Kumar, N. Mittal, “A Framework for Human Recognition using a Multimodel Gait Analysis Approach”, IEEE International Conference on Computing, Communication and Automation, 2016 (ICCCA-2016), Greater Noida, India, 29-30 April 2016.
  46. P. Goyal, S. Vyas, R. Kumar, “A Regulated Charging Scheme for Electric Vehicles Considering the Customers’ Perspective”, India Smart Grid Week (ISGW 2016), New Delhi, India, 15-19 March 2016.
  47. V. Sangwan, R. Kumar, A. K. Rathore, “Estimation of Battery Parameters of the Equivalent Circuit Model using Grey Wolf Optimization”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  48. V. Kalkhambkar, R. Kumar, R. Bhakar, “Joint Optimal Allocation of Battery Storage and Hybrid Renewable Distributed Generation”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  49. A. Shukla, K. Verma, R. Kumar, “Online Voltage Stability Monitoring of Distribution System using Optimized Support Vector Machine”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  50. S. Vyas, R. Kumar, R. Kavasseri, “Statistical Identification and Classification of Potential Islanding Precursors in a Grid-Connected Solar Photo Voltaic System”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  51. S. Reddy, L. Panwar, R. Kumar, B. K. Panigrahi, “Optimal Demand Response Allocation in Resource Scheduling with Renewable Penetration”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  52. L. K. Panwar, S. Reddy K, A. Verma, B. K. Panigrahi, R. Kumar, “Optimal Schedule of Plug in Electric Vehicles in Smart Grid with Constrained Parking Lots”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  53. S. Sreekumar, J. Verma, Sujil A, R. Kumar, “New Short Term Load Forecasting Models based on Growth Rate Scaling and Simple Averaging”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  54. A. Gupta, B. Singh, R. Kumar, “Optimal Provision for enhanced consumer satisfaction and energy savings by an Intelligent Household Energy Management system”, 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016), New Delhi, India, 4-6 March 2016.
  55. Dhiraj, S. Verma, R. Kumar, “A Modified Genetic Algorithm-based Fault Simulation technique for Sequential circuits”, 6th International Conference on Communication Systems and Network Technologies (CSNT-2016), Chandigarh, India, 5-7 March 2016.
  56. Dhiraj, S. Verma, R. Kumar, “A Novel approach to Fault Simulation and Testing in Combinational Circuits using Modified Genetic Algorithm”, 6th International Conference on Communication Systems and Network Technologies (CSNT-2016), Chandigarh, India, 5-7 March 2016.
  57. Sujil A, S. Choudhary, Jatin Verma, R. Kumar, “Agent Based Intelligent Fault Detection, Isolation and Restoration in Smart Power System”, IEEE Students’ Conference on Electrical, Electronics And Computer Sciences (SCEECS-2016), Bhopal, India, March 5-6, 2016.
  58. L. Panwar, S. Reddy, C. N. Raju, R. Kumar, “Experimental Analysis of Electrical Parameter Variation for Concentrated PV Module”, IEEE Students’ Conference on Electrical, Electronics And Computer Sciences (SCEECS-2016), Bhopal, India, March 5-6, 2016.
  59. S. Reddy, B.K. Panigrahi, L. Kumar, R. Kumar, “Resource Scheduling in Deregulated Market with Uncertain Wind Energy Generation”, IEEE Students’ Conference on Electrical, Electronics And Computer Sciences (SCEECS-2016), Bhopal, India, March 5-6, 2016.
  60. S. Jhajharia, S. Verma, R. Kumar, “Predictive Analytics for Breast Cancer Survivability: A Comparison of Five Predictive Models”, 2nd International Conference on Information and Communication Technology for Competitive Strategies (ICTCS-2016), Udaipur, India, March 4 -5, 2016.
  61. S. Reddy, L. Kumar, B K Panigrahi, R. Kumar, “Price Based Resource Scheduling with Renewable Energy in Emission Constrained Market Structure”, 2nd International Conference on Computational Intelligence and Communication Technology (ICICT-2016), Ghaziabad, India, 12-13 February 2016.
  62. S. Reddy, Siva N. Raju, L. Panwar, R. Kumar, “V-Trough Concentrator with Back Surface Cooling for Rooftop Photovoltaic System”, 2nd International Conference on Computational Intelligence and Communication Technology (ICICT-2016), Ghaziabad, India, 12-13 February 2016.
  63. Sreenu S., J. Verma, Sujil A., R. Kumar, “One Day Forth Forecasting of Hourly Electrical Load using Genetically Tuned Support Vector Regression for Smart Grid Frame Work”, 2nd International Conference on Recent Advances in Engineering and Computational Sciences (RAECS 2015), Chandigarh, India, 21-22 December 2015.
  64. C. Prakash, K. Gupta, R. Kumar, N. Mittal, “Fuzzy Logic based Gait Phase Detection using Passive Markers”, 5th International Conference on Soft Computing for Problem Solving (SocPros 2015), Roorkee, India, 18-20 December 2015. (Best Paper Award)
  65. S. Reddy, P. Sharma, S. Shrivastava, R. Kumar, “Strategic Plug Load Management System for Smart Buildings with Rooftop Photovoltaic System”, 12th IEEE India International Conference (INDICON 2015), New Delhi, 17-20 December 2015.
  66. S. Pal, R. Kumar, “DSM Scheduling Mechanism With Pricing Schemes Using Integer Linear Programming”, 39th National Systems Conference (NSC 2015), Dadri, India, 14 -16 December 2015.
  67. S. Shah, V. Jain, S. Jain, A. Mittal, J. Verma, S. Tripathi, R. Kumar, “Hierarchical classification for Multilingual Language Identification and Named Entity Recognition”, 7th meeting of Forum for Information Retrieval Evaluation (FIRE 2015), Gandhinagar, India, 4 – 6 December 2015.
  68. S. Vyas, R. Kumar, R. Kavasseri, “A Framework for Investigative Analysis of Islanding and Pre-Islanding Behaviour of Solar PV Inverters Connected to Distribution Grids”, IEEE IAS Joint Industrial and Commercial Power Systems / Petroleum and Chemical Industry Conference (ICPSPCIC 2015), Hyderabad, India, 19-21 November 2015.
  69. S. Vyas, R. Kumar, R. Kavasseri, “Exploration and Investigation of Potential Precursors to Unintentional Islanding in Grid-Interfaced Solar Photo Voltaic Systems”, IEEE International Conference on Energy Systems and Application (ICESA-2015), Pune, India, 30 October – 01 November 2015.
  70. S. Reddy, S. Goutham G, L. Panwar, R. Kumar, “Environmental Sustainability Analysis of Solar Photovoltaic (SPV) Systems”, International Conference on Computer Communication & Control (ICCCC-2015), Indore, India, 10-12 September 2015.
  71. C. Prakash, A. Mittal, R. Kumar, N. Mittal, “Identification of Gait Parameters using Silhouette Images”, 8th International Conference on Contemporary Computing (IC3-2015), Noida, India, 20-22 August 2015.
  72. S. Vyas, R. Kumar, R. Kavasseri, “Observations from Study of Pre-Islanding Behaviour in a Solar PV System Connected to a Distribution Network”, 4th International Conference on Advances in Computing, Communications and Informatics (ICACCI-2015), Kochi, India, 10-13 August 2015.
  73. C. Prakash, A. Mittal, R. Kumar, N. Mittal, “Identification of Spatio-Temporal and Kinematics Parameters for 2-D Optical Gait Analysis System using Passive Markers”, International Conference on Advances in Computer Engineering And Applications (ICACEA-2015), Ghaziabad, India, 19-20 March 2015. (Best Paper Award)
  74. S. Reddy K, L. K. Panwar, R. Kumar, “Cost-Emission Analysis of Electric Vehicle as Contingency Reserve in Resource Scheduling”, International Conference on Recent Developments in Control, Automation and Power Engineering (RDCAPE-2015), Noida, India, 12-13 March 2015.
  75. S. Vyas, R. Kumar, “Sizing and Strategic Scheduling of Distributed Generators in a Smart Microgrid for the Indian Pulp and Paper Industry”, India Smart Grid Week (ISGW 2015), Bangalore, India, 02 – 06 March 2015.
  76. B. Prasad, A. Agrawal, V. Viswanathan, A. R. Chowdhury, R. Kumar, S. K. Panda, “Genetic Algorithm Based Intelligent Station-keeping for Spherical Underwater Robot” International Symposium on Underwater Technology (UT15), Chennai, India, 23-25 February 2015.
  77. B. Prasad, A. Agrawal, V. Viswanathan, A. R. Chowdhury, R. Kumar, S. K. Panda, “A Visually Guided Spherical Underwater Robot” International Symposium on Underwater Technology (UT15), Chennai, India, 23-25 February 2015. (Best Poster)
  78. Shalini Pal, B. P. Singh R. Kumar, B. K. Panighari, “Consumer End Load Scheduling in DSM Using Multi-Objective Genetic Algorithm Approach”, International Conference on Computational Intelligence and Communication Technology (ICICT-2015), Ghaziabad, India, 13-14 February 2015.
  79. Sreenu Sreekumar, Sujil A, Jatin Verma, “Short Term Load Forecasting using Artificial Neural Networks: A State of Art”, 3rd International Conference on Advance Trend in Engineering, Technology and Research (ICATETR-2014) Kota, India, 22-23 December 2014. (Best Paper Award)
  80. S. Reddy, L. Panwar, R. Kumar, “Potential Benefits of Electric Vehicle Deployment as Responsive Reserve in Unit Commitment”, 9th IEEE International Conference on Industrial and Information Systems (ICIIS2014), Gwalior, India, 15-17 December 2014
  81. L. Panwar, S. Reddy, R. Kumar, “Eco-Economic Sizing of Autonomous Hybrid Energy System (AHES) using Particle Swarm Optimization (PSO)”, IEEE International Conference on Advances in Green Energy, 2014 (ICAGE’14), Trivandrum, India, 17-18 December 2014.
  82. Ankita Gupta, R. Kumar, “Realization of Load Based Pricing with Penetration of Renewable Generation for a Household”, 6TH IEEE Power India International Conference (PIICON 2014), New Delhi, India, 5-7 December 2014.
  83. Sheshnag Chitlur, Saurabh Kumar Agarwal, R. Kumar, “Short Term Wind Forecasting Using Logistic Regression Driven Hypothesis in Artificial Neural Network”, 6TH IEEE Power India International Conference (PIICON 2014), New Delhi, India, 5-7 December 2014.
  84. L. Panwar, S. Reddy, R. Kumar, “Productive Use of Distributed Renewable Generation Source with Electric Vehicle in Smart Grid”, 6TH IEEE Power India International Conference (PIICON 2014), New Delhi, India, 5-7 December 2014.
  85. Abhra Roy Chowdhury, Vinoth Vishwanathan, Bhuneshwar Prasad, Rajesh Kumar and S. K. Panda, “Inverse Dynamics Control of a Bio-inspired Robotic-Fish Underwater Vehicle Propulsion based on Lighthill Slender Body Theory”, OCEANS’14 MTS/IEEE Conference, Taipei, Taiwan, April 7-10, 2014.
  86. Dhiraj, Seema Verma, Rajesh Kumar, “An Efficient Approach to VLSI Circuit Partitioning using Evolutionary Algorithms”, International Conference on Computational Intelligence and Communication Networks (CICN 2014), Udaipur, India, November 14-16, 2014.
  87. R. K. Dohare, K. Singh, R. Kumar, “Artificial Neural Network Predictive Control of BTX Dividing Wall Column”, International Conference on Electrical, Electronics, Engineering Trends, Communication, Optimization and Sciences (E3COS), Vijayawada, India, October 11-12, 2014.
  88. Abhra Roy Chowdhury, Bhuneshwar Prasad, Vinoth Vishwanathan, Rajesh Kumar, S K Panda, “Bio-harmonized Dynamics Model for a Biology Inspired Carangiform Robotic Fish Underwater Vehicle”, 19th IFAC World Congress, Cape Town, South Africa, August 24-29, 2014.
  89. V. Kalkhambkar, R. Kumar, R. Bhakar, “Optimal Sizing of Solar Photovoltaic Generation and Battery Energy Storage”, IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2014), Jaipur, India, May 09-11, 2014.
  90. Manoj Gupta, R. Kumar, R. A. Gupta, “Detection of Power Quality Disturbances Using Symbolic Dynamics”, IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2014), Jaipur, India, May 09-11, 2014.
  91. R. A. Gupta, R. Kumar, Virendra Sangtani, Ajay Kr. Bansal, “Direct Torque Controlled Matrix Converter fed Induction Motor Drive”, IEEE International Conference on Circuit, Power and Computing Technologies (ICCPCT-2014), Thuckalay, March 20-21, 2014. (Best Paper Award)
  92. S. K. Agarwal, R. Kumar, “Explication of a logistic regression driven hypothesis to strengthen derivative approach driven classification for medical diagnosis”, IEEE Students’ Conference on Electrical, Electronics And Computer Sciences (SCEECS-2014), Bhopal, India, March 1-2, 2014.
  93. Gaurav Bhansali, R. Kumar, “Design Analysis and Dynamic Control of PEM Fuel Cell for Standalone Applications”, IEEE Students’ Conference on Electrical, Electronics And Computer Sciences (SCEECS-2014), Bhopal, India, March 1-2, 2014.
  94. V. Kumar, O. J. Shukla, G. Soni, R. Kumar, “A review on Artificial Neural Network approach in manufacturing systems”, National Conference on “Paradigms in Mechanical Engineering (PME-2014), India, 20 December 2014.
  95. Abhra Roy Chowdhury, Bhuneshwar Prasad, Vinoth Kumar, Rajesh Kumar, S. K. Panda, “Finding an Improved Operating Region for a Bio-inspired Robotic Fish Underwater Vehicle in the Light hill framework”, 2012 12th International Conference on Control, Automation and Systems, 2013 IEEE RAS International Conference on Robotics and Biomimetics (ROBIO), Shenzhen, December 12-14, 2013.
  96. Bhanu P. S., S. Agarwal, A. Gupta, R. Kumar, “On-Line Low Cost Unbalance Source Identifier”, India Educators’ Conference (TIIEC-2013), India 2013, 340 – 345.
  97. Sujil A, Bhanu P.S, Ankita Gupta, R. Kumar, “Demand Side Management: A State of Art”, “International Conference on Advance Trends in Engineering and Technology (ICATET-2013), Jaipur, India, December 19-20, 2013, 258-263. (Best Paper Award)
  98. R. K. Dohare, K. Singh, R. Kumar, “Robust Model Based Control of Dividing Wall Column”, International Conference on Control Communication and Computing (ICCC-2013), Trivandrum, India, December 13-15, 2013.
  99. Sheshnag, R. Kumar, “Impact of Atmospheric parameters on Power performance of wind Turbine”, International Conference on Renewable Energy and Sustainable Energy (ICRESE’13), Coimbatore, India, December 5-6, 2013, 175-181.
  100. S. Agrawal, B. Prasad, V. K. Viswanathan, R. Kumar, S. K. Panda, “Estimation of Robotic Fish Design Parameters through Multi-Objective Heuristic Optimization”, 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), Vienna, Austria, November 10-13, 2013.
  101. Vaiju Kalkhambkar, Rajesh Kumar, Rohit Bhakar, “PV-Battery Placement and Sizing for Loss Reduction and Voltage Profile Improvement”, 5th International Conference on Computer Applications in Electrical Engineering-Recent Advances (CERA-13), Roorkee, India, October 3-5, 2013, 179-184.
  102. Dhiraj, Seema Verma, Rajesh Kumar, “A Bottom up Approach to Placement and Compaction of Standard Modules in VLSI Circuits”, International Conference on Advanced Electronic Systems (ICAES 2013), Pilani, India, September 21-23, 2013, 133-137.
  103. S. Lalwani, R. Kumar, N. Gupta, “A Study on Inertia Weights Schemes for Improved Particle Swarm Optimization Algorithm for Multiple Sequence Alignment”, 6th International Conference on Contemporary Computation (IC3 2013), Noida, India, August 8-10, 2013, 283-288.
  104. B. Prasad, A. Agrawal, V. Viswanathan, P. Yadav, R. Kumar, S. K. Panda, “Energy Efficient Optimal Thrust Allocation for Spherical Underwater Vehicle”, 22nd International Symposium on Industrial Electronics (ISIE 2013) Taipei, Taiwan May 28-31, 2013.
  105. Sujil A, S. K. Agarwal, R. Kumar, “Centralized Multi-agent Self-healing Power System with Super Conducting Fault Current Limiter”, IEEE Conference on Information and Communication Technologies (ICT 2013), Thuckalay, Tamil Nadu, India, 11-12 April 2013, 1182-1187.
  106. S. K. Agarwal, B. P. S. Rawat, R. Kumar, “Chaos Theory based Mathematical Modelling as manifested from Scalp EEG using Frequency Analysis”, IEEE Conference on Information and Communication Technologies (ICT 2013), Thuckalay, Tamil Nadu, India, 11-12 April 2013, 775-780.
  107. R. K. Dohare, K. Singh, R. Kumar, “Optimal parameters for BTX separation in Divided Wall Column” International Conference on Advances in Chemical Engineering (ICACE 2013), Raipur, Chhattisgarh, India, April 05-06, 2013.
  108. G. Singh, G., Janyani, V., Kumar, R., Solanki, A.K., “Modeling and performance analysis of single substrate based 1×4 digital optical switches”, IEEE Photonics Global Conference (PGC), Singapore, December 13-16, 2012.
  109. R. K. Dohare, K. Singh, R. Kumar, “Neural Network Predictive control of dividing wall column”, CHEMCON – 2012, Jalandhar, INDIA, December 27-30, 2012.
  110. Abhra Roy Chowdhury, Bhuneshwar Prasad, Vinoth Vishwanathan, Rajesh Kumar, S. K. Panda, “Kinematics study and implementation of a biomimetic robotic-fish underwater vehicle based on Light hill slender body model”, 2012 IEEE/OES Autonomous Underwater Vehicles (AUV), Southampton, UK, 24-27 Sept. 2012.
  111. Abhra Roy Chowdhury, Bhuneshwar Prasad, Vinoth Vishwanathan, Rajesh Kumar, S. K. Panda, “Implementation of a BCF Mode Bio-mimetic Robotic-Fish Underwater Vehicle based on Light hill Mathematical Model”, 12th International Conference on Control, Automation and Systems (ICCAS 2012), Jeju Island, Korea, 17-21October 2012. (Best Paper Award)
  112. D. C. Hoang, C. K. Thye, R. Kumar, S. K. Panda, “Intra-cluster Power Management in Hierarchical Routing Protocols for Wireless Sensor Networks”, 21st IEEE International Symposium on Industrial Electronics (ISIE2012) , Hangzhou, China, 28-31 May, 2012
  113. Sandeep Rana, Ela Kumar, Rajesh Kumar, “A Study of Particle Swarm Optimization Parameters for Data Clustering”, Emerging Paradigms and Practice in Information & Communication Technology and Management, (2012 EPPICTM), Greater Noida, India, July 26-28, 2012.
  114. R. A. Gupta, Rajesh Kumar, Ajay Kumar Bansal, “Economic Analysis and Design of Stand-Alone Wind/Photovoltaic Hybrid Energy System using Genetic Algorithm”, International Conference on
 Computing, Communication and Applications
(ICCCA 2012), Dindigul, Tamilnadu, India, 22 – 24 February, 2012.
  115. R. A. Gupta, Rajesh Kumar, Virendra Sangtani , Ajay Kumar Bansal, “Comparative Analysis of Three Phase Matrix Converter fed Induction Motor Drive”, International Conference on
 Computing, Communication and Applications
(ICCCA 2012), Dindigul, Tamilnadu, India, 22 – 24 February, 2012.
  116. A. Agrawal, N. Kunwar, R. Kumar, B. Prasad, S.K. Panda, “A Heuristic based Optimal Airfoil Geometry and Ballast system design of Bio-Mimetic Robot Fish for Drag Minimization”, Fourth International Conference on Structural Stability and Dynamics (ICSSD 2012), Jaipur, INDIA, pp. 12-18, January 4–6, 2012.
  117. Pulak Bhushan, Matthew Dailey, A. B. Gupta, Sunil K. Gupta, Rajesh Kumar, “Application of Image Processing for Developing A Modified Dean’s Index For Classification of Dental Fluorosis”, National Conference on Water Quality Management (NCWQM 2012), Jaipur, INDIA, December 20-22,2012.
  118. Bhanu Pratap Singh, Saurabh Kumar Agarwal, Rajesh Kumar, “ Voltage harmonic elimination in PWM A.C. chopper using Particle Swarm Optimization”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 10-15, November 1-2, 2012.
  119. Vaiju Kalkhambkar, Gaurav Bhansali, Rajesh Kumar, Rohit Bhakar, , “Analysis of DC-DC Converters for PV Solar Home Application”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 28-33, November 1-2, 2012.
  120. R. A. Gupta, Rajesh Kumar, Virendra Sangtani, Ajay Kr. Bansal, “Switching Strategies of Three Phase Matrix Converter fed Induction Motor Drive ”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 54-59, November 1-2, 2012.
  121. Rupal Singh, Rajesh Kumar, “Simulation of DSTATCOM for Improving Voltage Profile”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 131-135, November 1-2, 2012.
  122. S. Rajwanshi, A. Gupta, R. Kumar, “Feasibility & Reliability Analysis of Renewable Energy Generation in the Jhunjhunu District of Rajasthan-India”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 274-279, November 1-2, 2012.
  123. Sujil A, Rajesh Kumar, “Zero Time Delay Fault Current Limiters for Smart Grid Application”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 280-283, November 1-2, 2012.
  124. R. A. Gupta, Rajesh Kumar, Ajay Kumar Bansal , “Solar radiation Forecasting based on Artificial Neural Network Voltage harmonic elimination in PWM A.C. chopper using Particle Swarm Optimization”, 3rd National Conference on Power Electronics and Intelligent Control (NCPEIC 2012), Jaipur, INDIA, pp. 370-375, November 1-2, 2012.
  125. Dohare R.K. , Singh K. , Kumar R. , Upadhyaya S. , Gupta S. , “Dynamic Model of Dividing Wall Column for Separation of Ternary System”, CHEMECA 2011, Sydney, AUSTRALIA, September 2011.
  126. Abhra Chowdhury, Bhuneshwar Prasad, Vinoth Kumar, Sanjib Panda, Rajesh Kumar, “Design, Modelling and Open-loop Control of a BCF Mode Bio-mimetic Robotic Fish”, 9th IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR2011), Kyoto, JAPAN, pp. 226-231, November 1-5, 2011.
  127. S. Bhuyan, S. K. Panda, K. Sivananda, R. Kumar, “A Compact Resonance-Based Wireless Energy Transfer System for Implanted Electronic Devices”, International Conference on Energy, Automation and Signal (ICEAS 2011), Bhubaneswar, INDIA, December 28-30, 2011.
  128. R. Dohare, K. Singh, R. Kumar, N. Sharma, “Model Predictive Control of a Divided Wall Distillation Column”, CHEMCON – 2011, Bangalore, INDIA, December 27-29, 2011.
  129. Ajay Kumar Bansal, R. A. Gupta, Rajesh Kumar, “Fuzzy estimator for Sensorless PMBLDC Motor Drive under Speed Reversal”, IEEE Indian International Conference on Power Electronics (IICPE-11), New Delhi, INDIA, January, 28-30, 2011.
  130. Ajay Kumar Bansal, R. A. Gupta, Rajesh Kumar, “Optimization of Hybrid PV/wind Energy System using Meta Particle Swarm Optimization (MPSO)”, IEEE Indian International Conference on Power Electronics (IICPE-11), New Delhi, INDIA, January, 28-30, 2011.
  131. R. A. Gupta, Rajesh Kumar, Virendra Sangtani, Ajay Kumar Bansal, “ A Compendium of reference frames for AC Drives”, All India Seminar on Power Electronics Application to Power Systems (PEAPS-11), Jaipur, INDIA, November, 19-20, 2011.
  132. R. A. Gupta, Rajesh Kumar, Ajay Kumar Bansal, “Design of Stand-Alone Wind/Photovoltaic Hybrid Energy System”, All India Seminar on Power Electronics Application to Power Systems (PEAPS-11), Jaipur, INDIA, November, 19-20, 2011.
  133. R. A. Gupta, Rajesh Kumar, Manoj Gupta, “Effect of Training Algorithms on the Accuracy in Power Quality Signature Recognition Using Neural Networks”, All India Seminar on Power Electronics Application to Power Systems (PEAPS-11) , Jaipur, INDIA, November, 19-20, 2011.
  134. Rajeev Kumar, Kailash Singh, Rajesh Kumar, “Sensitivity Analysis of Divided Wall Distillation Column”, The Indian Chemical Engineering Congress (CHEMCON – 2010), Annamalainagar, INDIA, December 27-29, 2010.
  135. Parikshit Yadav, Rajesh Kumar, S. K. Panda, C. S. Chang, “Improved Harmony Search Algorithm based Optimal Design of Brushless DC Motor”, IEEE Conference on Sustainable Energy Technologies (ICSET,10), Kandy, SRI LANKA, December 6-9, 2010.
  136. S. Bhuyan, S. Sahoo, R. Kumar, S. K. Panda, “Wireless Energy Transmission to Piezoelectric Component by Flat Spiral Coil Antenna-like Structure”, IEEE Conference on Sustainable Energy Technologies (ICSET,10), Kandy, SRI LANKA, December 6-9, 2010.
  137. KoKo Win, Xinhui Wu, S. Dasgupta, Wong Jun Wen, Rajesh Kumar, Panda S.K., “Efficient Solar Energy Harvester for Wireless Sensor Nodes”, IEEE International Conference on Communication Systems, ICCS -2010, Singapore, November 17-20, 2010.
  138. K. Bishnoi, R. A. Gupta, Rajesh Kumar, “Artificial Neural Network Controlled High Performance Switched Reluctance Motor Drive”, International Conference on Electrical Power and Energy Systems, ICEPES-2010, Bhopal, INDIA, pp. 673-678, August 26-28, 2010.
  139. R. A. Gupta, Rajesh Kumar, Bharat Bhushan Jain, “Performance Analysis of 36-Pulse AC-DC Converter Fed Vector Controlled Induction Motor Drive (VCIMD)”, International Conference on Electrical Power and Energy Systems, ICEPES-2010, Bhopal, INDIA, pp. 422-431, August 26-28, 2010.
  140. Parikshit Yadav, R. Kumar, S.K. Panda, C. S. Chang, “Optimization of the Power Generation scheduling in Oil-Rig Platforms using Genetic Algorithm”, IEEE International Symposium on Industrial Electronics, ISIE- 2010, Bari, ITALY, pp. 2292-2297, July 04-07, 2010.
  141. D. C. Hoang, R. Kumar, S.K. Panda, “Fuzzy C-Means Clustering Protocols for Wireless Sensor Networks”, IEEE International Symposium on Industrial Electronics, ISIE- 2010, Bari, ITALY, pp. 3477-3482, July 04-07, 2010.
  142. D. C. Hoang, Parikshit Yadav, R. Kumar, S.K. Panda, “A Robust Harmony Search Algorithm based Clustering Protocol for Wireless Sensor Networks”, IEEE International Conference on Communications, Cape Town, SOUTH AFRICA, pp. 1-5, May 23-27, 2010.
  143. Soniya Lalwani, R. Kumar, Priyanka Choudhary, M Krishna Mohan, P Ghosh, Nilama Gupta, “An ABS Algorithm based approach for Multiple Sequence Alignments”, International Conference of Women Mathematicians, ICWM-10, Hyderabad, INDIA, (Poster), August 17-18, 2010.
  144. R. A. Gupta, Rajesh Kumar, Manoj Gupta, “A novel approach to identification of power quality disturbances using continuous wavelet transform”, International Conference and Workshop on Emerging Trends in Technology, ICWET-10, Mumbai, INDIA, ACM Portal, pp. 1023-1023 (Poster), February 26‐27, 2010.
  145. R. A. Gupta, Rajesh Kumar, Rajesh S. Surjuse, “ Implementation of An Adaptive Neuro-Fuzzy Based Speed Controller for VCIM Drive”, 4th International Conference on Computer Applications in Electrical Engineering Recent Advances, CERA-09, Roorkee, INDIA, pp. 47-50, February 19‐21, 2010.
  146. R. A. Gupta, Rajesh Kumar, and Rajesh S. Surjuse, “An Adaptive Neuro-Fuzzy Based Stator Current MRAS Observer for Speed Sensorless Induction Motor Drives”, 4th Indian International Conference on Artificial Intelligence (IICAI-09), Tumkur, INDIA, pp.862-878, December 2009.
  147. R. A. Gupta, Rajesh Kumar, and Rajesh S. Surjuse, “ANFIS Based Intelligent Control of Vector Controlled Induction Motor Drive”, Second International Conference on Emerging Trends in Engineering and Technology, ICETET-09, Nagpur, INDIA, pp.674-680, December 2009. (Best Paper Award)
  148. R. A. Gupta, Rajesh Kumar, and Rajesh S. Surjuse, “An Adaptive Neuro-Fuzzy Based Speed Sensorless Induction Motor Drives”, World Congress on Nature & Biologically Inspired Computing (NaBIC 2009), Coimbatore, INDIA, pp.397-402, December 2009.
  149. A. Sadu, Rajesh Kumar, Rajesh G. Kavasseri, “Optimal Placement of Phasor Measurement Units using Particle Swarm Optimization”, World Congress on Nature & Biologically Inspired Computing (NaBIC 2009), Coimbatore, INDIA, pp.1708-1713, December 2009.
  150. R. A. Gupta, Rajesh Kumar, Rajesh S. Surjuse, “A Survey on: Application of Model Reference Adaptive System (MRAS) to Induction Motor Drives”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp 247-255, December 2009.
  151. R. A. Gupta, Rajesh Kumar, Manoj Gupta, “A Literature Survey of power Quality disturbances”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp 12-23, December 2009.
  152. R. A. Gupta, Rajesh Kumar, Ajay Kumar Bansal, “A new methodology for optimizing the size of hybrid PV/wind system using Genetic Algorithms”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp 133-139, December 2009.
  153. R. A. Gupta, Rajesh Kumar, S.K. Bishnoi, “Fuzzy controlled nonlinear high performance switched reluctance motor drive”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp 149-156, December 2009.
  154. R. A. Gupta, Rajesh Kumar, B. B. Jain, “Performance analysis of 30-pulse AC-DC Converter fed Vector Controlled Induction Motor Drive (VCIMD)”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp. 211-217, December 2009.
  155. R. A. Gupta, Rajesh Kumar, Ajay Kumar Bansal, Virendra Sangtani, “Modular approach for Simulink model of three phase induction motor”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp. 229-233, December 2009.
  156. R. A. Gupta, Rajesh Kumar, S. V. Bhangale, “Modified stator flux estimation algorithm for Direct Torque Controlled Induction Motor Drive”, National conference on Recent Advances in Electrical and Electronics Engineering (RAEEE-2009), NIT Hamirpur, INDIA, pp. 256-261, December 2009.
  157. Rajesh Kumar, Rudesh Kumar, A. Sadu, “Realization of DSTATCOM implementing Fuzzy Logic Controller for reactive power compensation”, International Conference on Electrical Energy Systems & Power Electronics in Emerging Economies (ICEESPEEE-09), Chennai, INDIA, pp.15-23, April 2009.
  158. R. A. Gupta, Rajesh Kumar, S.V. Bhangale, “18-Sector Switching Strategy for Torque Ripple Reduction of Direct Torque Controlled Induction Motor Drive”, International Conference on Electrical Energy Systems & Power Electronics in Emerging Economies (ICEESPEEE-09), Chennai, INDIA, pp.295-302, April 2009.
  159. R. A. Gupta, Rajesh Kumar, S.K. Bishnoi, “Laboratory Verification of Modeling for A DSP Controlled 8/6 Switched Reluctance Motor Drive”, International Conference on Electrical Energy Systems & Power Electronics in Emerging Economies (ICEESPEEE-09), Chennai, INDIA, pp.295-302, April 2009.
  160. R. A. Gupta, Rajesh Kumar, Rajesh S. Surjuse, “An Adaptive Neural Integrator for Improving Flux Estimation in Field-Orientation Control of Induction Motor Drives”, International Conference on Electrical Energy Systems & Power Electronics in Emerging Economies (ICEESPEEE-09), Chennai, INDIA, pp.810-815, April 2009.
  161. R. A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, “Speed Controller for PM Brushless DC Motor Drive Based on Fuzzy Logic” International Conference on Electrical Energy Systems & Power Electronics in Emerging Economies (ICEESPEEE-09), Chennai, INDIA, pp.797-803, April 2009.
  162. R. A. Gupta, Rajesh Kumar, Rajesh S. Surjuse, “A Neuro-Fuzzy based MRAS observer for speed Sensorless vector controlled induction motor drive”, International conference on emerging and futuristic system and technology, (ICE-FST’09), Alwar, 9-11 April 2009, pp 92-97.
  163. Lata Gidwani, Rajesh Kumar, “Interfacing Offshore Wind Farms to AC Grid Systems Using Neuro-Fuzzy Logic Based PWM VCVSI”, POWERCON-08, New Delhi, October 12 – 15, 2008.
  164. Lata Gidwani, Rajesh Kumar, “Simulation of Wind Power Impact on DFIG Turbine Connected to Utility Grid”, POWERCON-08, New Delhi, October 12 – 15, 2008
  165. Namita Mittal, M.C. Govil, Richi Nayak, Rajesh Kumar, Himanshu Gothwal, and Dwipayan Das, “A Hybrid Clustering Based Filtering Approach with Efficient Sequencing”, IAENG International Conference on Data Mining and Applications (ICDMA’08), Hong Kong, 19-21 March, 2008, pp. 517-520.
  166. Rajesh Kumar, Mukesh Kumar, Dhiraj Sangwan, “Multiple Stuck-at Fault Identification in Combinational Circuits on Genetic Algorithm”, IEEE Sponsored 2nd International Conference on Soft Computing (ICSC-2008), INDIA. pp. 91-106, November 2008.
  167. Rajesh Kumar, Devendra Sharma, Anupam Kumar, “A Novel Approach for Economic Power Dispatch Using Particle Swarm Optimization”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 75-79, September 2008.
  168. S.V. Bhangale, Rajesh Kumar, R.A. Gupta, “Stator Flux Estimation Algorithm for Direct Torque Controlled Induction Motor Drive”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 1-5, September 2008.
  169. Rajesh Kumar, Mukesh Kumar, Dhiraj Sangwan, “Genetic Algorithm Based Fault Identification in VLSI Circuits”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 103-108, September 2008.
  170. R.A. Gupta, Rajesh Kumar, Rajesh. S. Surjuse, S.V. Bhangale, “ANN Speed Sensorless Estimator Based Vector Controlled Induction Motor Drive”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 89-93, September 2008.
  171. Rajesh Kumar, Rudesh Kumar, Abhinav Sadu, “Modeling of DSTATCOM using MATLAB/SIMULINK for reactive power compensation and voltage regulation”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 131-137, September 2008.
  172. Lata Gidwani, Rajesh Kumar, H. P. Tiwari, “Modeling and Analysis of Power Electronic Based Wind Energy Conversion System”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 41-45, September 2008.
  173. R.A. Gupta, Rajesh Kumar, Bharat Bhushan Jain, “A Comparative Analysis of 12-Pulse and 18-Pulse AC-DC Converters for Vector Controlled Induction Motor Drives”, 2nd National Conference on Power Electronics and Intelligent Control (NCPEIC-2008), MNIT Jaipur, Rajasthan, INDIA, pp. 12-20, September 2008.
  174. Lata Gidwani, Rajesh Kumar, “Development of Wind Energy: Modeling and Offshore Requirements”, All India Seminar on ” Bridging the Demand Gap and Alternative Sources of Energy”, The Institute of Engineers (I), Rajasthan State Centre, Jaipur, INDIA, pp. 183-189, February 2008.
  175. Lata Gidwani, Rajesh Kumar, “A Fuzzy Logic Based Power Electronic System for Wind Energy Conversion Scheme”, IEEE International Conference on Computer Intelligence and Multimedia applications (ICCIMA 2007), Sivakasi, Tamil Nadu, India, Dec. 13-15, 2007, pp. 395-399.
  176. Rajesh Kumar, Saurabh Malpani, Vishal Singh, Rakesh Sharma J, “Fuzzy Filters for Image Filtering”, IEEE INDICON -2007, Bangalore, INDIA, September 2007.
  177. Rajesh Kumar, Narendra Singh, Jogendra Singh, V.P. Santhosh, “An Algorithm for Rotor Position Estimation of Sensorless Permanent Magnet Brushless DC Motor Drive using Three Back-EMFs”, IEEE INDICON -2007, Bangalore, INDIA, September 2007.
  178. Rajesh Kumar, R. A. Gupta and Manoj Gupta, “Recognition of Power Quality Events Using Fuzzy Logic”, IEEE INDICON -2007, Bangalore, INDIA, September 2007.
  179. Rajesh Kumar, R.A. Gupta, Ajay Kr. Bansal, “Identification and Control of PMSM using Artificial Neural Networks”, IEEE International Symposium on Industrial Electronics (ISIE2007), Vigo, SPAIN, pp. 30-35, June2007.
  180. Rajesh Kumar, R.A. Gupta, S.V. Bhangale, “A Simulink Based Dynamic Modeling and Analysis of High Performance Induction Motor Drive”, International Conference on Modeling and Simulation (MS’07), Kolkata, India, pp. 507-511, December 3-5, 2007.
  181. Rajesh Kumar, R.A. Gupta, S.V. Bhangale, “A PFC Based High Performance Induction Motor Drive”, International Conference on Modeling and Simulation (MS’07), Kolkata, India, pp. 512-516, December 3-5, 2007.
  182. R.A. Gupta, Rajesh Kumar, Saurabh Goyal, Parikshit Yadav, “Design, Analysis and Simulation of DC-to-DC Fly Back Converter”, International Conference on Modeling and Simulation (MS’07), Kolkata, India, pp. 75-79, December 3-5, 2007.
  183. Lata Gidwani, Rajesh Kumar, “Application of Artificial Intelligence Techniques to Power Systems”, IEEE Sponsored International Conference-RASIET 07.
  184. R.A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, “Fuzzy PI Controller for Permanent Magnet Brushless DC Motor” IEEE Sponsored International Conference-RASIET 07.
  185. R.A. Gupta, Rajesh Kumar, Bharat Bhushan Jain, “Matlab/Simulink Model of Autotransformer for 18-Pulse AC-DC Converters fed Vector Controlled Induction Motor Drives”, IEEE Sponsored International Conference-RASIET 07.
  186. R.A. Gupta, Rajesh Kumar, S K Bishnoi, “Hardware Implementation of Switched Reluctance Motor Drive in Open Loop Mode”, IEEE Sponsored International Conference-RASIET 07.
  187. R.A. Gupta, Rajesh Kumar, Manoj Gupta, “An Investigation Toward Applications of Soft Computing in Analysis of Power Quality Disturbances”, IEEE Sponsored International Conference-RASIET 07.
  188. R.A. Gupta, Rajesh Kumar, S.V. Bhangale, “Simulation And Analysis Of The Direct Vector Control Of Induction Motor Drive Considering Core Loss”, IEEE Sponsored International Conference-RASIET 07.
  189. R.A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, Virendra Sangtani, “Calculated m- values of Matrix Converter”, IEEE Sponsored International Conference-RASIET 07.
  190. Swati Singh, Rajesh Kumar, H.P. Tiwari, “Modeling and Simulation Of linear Induction Motor Based on Matlab\Simulink”, IEEE Sponsored International Conference-RASIET 07.
  191. Rajesh Kumar, R. A. Gupta, Ajay Kr. Bansal and Virendra Sangtani, “Simulation and Analysis of Induction Motor with Matrix Converter”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 72-76, March 2007.
  192. Rajesh Kumar, Saurabh Malpani, Vishal Singh, Rakesh Sharma J, “Image Filtering and Analysis through Digital Filters”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 982-987, March 2007.
  193. Rajesh Kumar, H. P. Tiwari, Lata Gidwani, “Fault Detection and Isolation in Power Transmission and Distribution Systems Using Artificial Intelligence Techniques”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 970-976, March 2007.
  194. Rajesh Kumar, Lata Gidwani, “A Fuzzy Logic Control System for Industrial Temperature Regulation”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 66-71, March 2007.
  195. Rajesh Kumar, Arpit Jain, Anupam Kumar, Himanshu Gothwal, “Computer Controlled Multi-tasking Car”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 965-969, March 2007.
  196. R. A. Gupta, Rajesh Kumar, Saurabh Goyal, Parikshit Yadav, “ Design, Analysis and Simulation of DC-DC Fly back Converter”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), INDIA, pp. 977-981, March 2007.
  197. Rajesh Kumar, R.A. Gupta, S.V. Bhangale, Shree Krishna, “Simulation and Analysis of the Direct Vector Control Technique for Induction Motor Drive”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  198. H. P. Tiwari, Rajesh Kumar, M.K .Dayma, “Simulation and Analysis of Single-Phase to Single-Phase Cycloconverter”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  199. R. A. Gupta, Rajesh Kumar and Manoj Gupta, “Estimation of Electric Load Composition for Power Quality Using MATLAB”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  200. Rajesh Kumar, R. A. Gupta and Ajay Kr. Bansal, “The Modeling and Simulation of a vector controlled Permanent Magnet Synchronous Motor Based on Matlab / Simulink”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  201. Rajesh Kumar, Jai Shree Vajpai, R. A. Gupta, Shree Krishna, “The Dempster – Shafer theory based fault diagnosis in complex systems”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  202. Rajesh Kumar, R.A. Gupta, S.V. Bhangale, Shree Krishna, “Fuzzy controller for stabilization of inverted pendulum”, IEEE sponsored International Conference on Recent Advancements and Applications of Computer in Electrical Engineering (RACE), Bikaner, INDIA, March 2007.
  203. Rajesh Kumar, Anupam Kumar, Himanshu Gothwal, “Micro-Controller and their Applications in Robotics”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 257-262, July 2007.
  204. Rajesh Kumar, R. A. Gupta, Manoj Gupta, “Classification of Power Quality Disturbances Using Fuzzy Logic”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 307-310, July 2007.
  205. Lata Gidwani, Rajesh Kumar, H. P. Tiwari, “Fuzzy Based Fault Distance Estimation in Electrical Power transmission Lines”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 69-69, July 2007.
  206. R. A. Gupta, Rajesh Kumar, S.V. Bhangale, “Real Time PC-based Simulator of Electric Drives Systems”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 218-222, July 2007.
  207. R. A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, Virendra Sangtani, “Simulation of Induction Motor through Matrix Converter”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 223-228, July 2007.
  208. R. A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, “Identification and control of PMSM using Neural Network with Voltage Topology”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 229-234, July 2007.
  209. R. A. Gupta, Rajesh Kumar, S. K. Bishnoi, “Converter Topologies for High performance Switched Reluctance Motor Drives”, National Conference on Role of Computers and Electronics in Power System (NCEE-07), JECRC Jaipur, Rajasthan, INDIA, pp. 240-246, July 2007.
  210. Rajesh Kumar, R.A. Gupta, S.V. Bhangale, “Comparative Analysis of FOC and DTC for High Performance Induction Motor Drive”, National Conference on Power Electronics and Intelligent Control (NCPEIC-2007), MNIT Jaipur, Rajasthan, INDIA, pp. 90-95, March 2007.
  211. Rajesh Kumar, Lata Gidwani, “Recent Trends In Intelligent Control of Ac Drives: An Industry Point of View”, National Conference on Power Electronics and Intelligent Control (NCPEIC-2007), MNIT Jaipur, Rajasthan, INDIA, pp. 62-67, March 2007.
  212. R.A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, “Identification and control of PMSM using Neural Network with Current Topology”, National Conference on Power Electronics and Intelligent Control (NCPEIC-2007), MNIT Jaipur, Rajasthan, INDIA, pp. 136-141, March 2007.
  213. R. A. Gupta, Rajesh Kumar, Ajay Kr. Bansal, Virendra Sangtani, “MATLAB / Simulink model of Three Phase Matrix Converter”, National Conference on Power Electronics and Intelligent Control (NCPEIC-2007), MNIT Jaipur, Rajasthan, INDIA, pp. 57-61, March 2007.
  214. Rajesh Kumar, R.A. Gupta, Sachin Goyal, S.K. Bishnoi, “Simulation and Analysis of Fuzzy Tuned PID Controller Based PFC Converter-Inverter Fed SRM Drive”, IEEE International Conference on Industrial Technology (ICIT2006), Mumbai, INDIA, pp. 2498-2503 , December 2006.
  215. Rajesh Kumar, R.A. Gupta, Bhim Singh, “Intelligent Tuned PID Controllers for PMSM Drive – A Critical Analysis”, IEEE International Conference on Industrial Technology (ICIT2006), Mumbai, INDIA, pp. 2055-2060, December 2006.
  216. Rajesh Kumar, R.A. Gupta, K.S. Pratap, “Implementation and Analysis of Five-Level Inverter with Space Vector PWM Algorithm”, IEEE International Conference on Industrial Technology (ICIT2006), Mumbai, INDIA, pp. 1665-1669, December 2006.
  217. R.A. Gupta, Rajesh Kumar, Borra Suresh Kumar, “Direct Torque Controlled Induction Motor Drive with Reduced Torque Ripple”, IEEE International Conference on Industrial Technology (ICIT2006), Mumbai, INDIA, pp. 2073-2078, December 2006.
  218. Rajesh Kumar, Narendra Singh, Jogendra Singh, V. P. Santhosh, “ A Nonlinear Reduced Order Observer for Rotor Position Estimation of Sensorless Permanent Magnet Brushless DC Motor Drive”, 32nd Annual Conference of the IEEE Industrial Electronics Society (IECON-2006), Paris, FRANCE, pp. 235-240, November 2006.
  219. Rajesh Kumar, V. P. Santhosh, “An Artificial Neural Network Based Rotor Position Estimation for Sensorless Permanent Magnet Brushless DC Motor Drive”, 32nd Annual Conference of the IEEE Industrial Electronics Society (IECON-2006), Paris, FRANCE, pp.649-654, November 2006.
  220. Borra Suresh Kumar, R.A. Gupta and Rajesh Kumar, “12-sector Methodology of Torque ripple reduction in a Direct Torque controlled Induction Motor Drive”, SICE-ICASE International Joint Conference 2006 in Bexco, Busan, KOREA, pp. 3587-3592, October 2006.
  221. R.A. Gupta, Rajesh Kumar, Bhangale S.V., “Current Control Schemes for Three-Phase Voltage Source Inverter”, National Conference on Advances in Electrical Engineering (AEE-2006), MITS Gwalior, Madhya Pradesh, INDIA, pp. 6-10, November 2006.
  222. R.A. Gupta, Rajesh Kumar, Ajay Kr. Bansal and Virendra Sangtani, “Simulation of three-phase Matrix Converter”, National Conference on Advances in Electrical Engineering (AEE-2006), MITS Gwalior, Madhya Pradesh, INDIA, pp. 1-5, November 2006.
  223. R. A. Gupta, Rajesh Kumar, Manoj Gupta, “Simulation of Power Quality Disturbances Using Matlab”, National Conference on Advances in Electrical Engineering (AEE-2006), MITS Gwalior, Madhya Pradesh, INDIA, pp. 110-113, November 2006.
  224. Rajesh Kumar, R.A. Gupta, Ajay Kr. Bansal, “Artificial Neural Networks for AC Drives”, National Conference on Computational Techniques in Decision Making (NCCTDM-06), Engineering College, Bikaner, Rajasthan, INDIA, pp.1-5, Oct. 2006.
  225. Rajesh Kumar, R.A. Gupta, Shree Krishna, “Fuzzy Controlled Single Phase Buck-Boost Converter”, National Conference on Computational Techniques in Decision Making (NCCTDM-06), Engineering College, Bikaner, Rajasthan, INDIA, pp. 135-141, Oct. 2006.
  226. R.A. Gupta, Rajesh Kumar, Borra Suresh Kumar, “Power Quality Considerations of VSI fed Induction Motor Drive”, All India Seminar on ” Alternative Sources of Energy and Quality Power Vision-2020″, The Institute of Engineers(I), Rajasthan State Centre, Jaipur, INDIA, February 2006.
  227. Rajesh Kumar, R.A. Gupta, K.S. Pratap, “Power Quality Analysis of various Control Methods for VSI”, All India Seminar on ” Alternative Sources of Energy and Quality Power Vision-2020″, The Institute of Engineers(I), Rajasthan State Centre, Jaipur, INDIA, February 2006.
  228. Sachin Goyal, Rajesh Kumar, R. A. Gupta, “Simulation and Analysis of Current Controlled PFC Converter-Inverter Fed SRM Drive”, IEEE International Conference on Industrial Technology (ICIT2005), HONG KONG, pp.1433-1437, December 2005.
  229. Sachin Goyal, Rajesh Kumar, R. A. Gupta, “A New Approach Of Reduction Of Supply Harmonics Of Single-Phase Converter Fed Close Loop Dc Drive”, 4th International Workshop on Compatibility in Power Electronics (CPE-05), POLAND, June 2005.
  230. Rajesh Kumar, R.A. Gupta, Bhim Singh, “Performance Analysis Of Vector Controlled Permanent Magnet Synchronous Motor With Modified Fuzzy Tuned PID Controller”, International Conference on Computers Applications in Electrical Engineering Recent Advances (CERA 05), Roorkee, INDIA, pp. 570-574, Sept./Oct. 2005.
  231. R. A. Gupta, Rajesh Kumar, Mohit Gupta, A.H. Varghese, “Modeling And Simulation Of A Switched Reluctance Motor For Its Four Quadrant Operation”, National Conference on Emerging Computational Techniques and Their Applications (ECTEA-05), M.B.M. Engineering College, Jodhpur, Rajasthan, INDIA, pp. 163-168, Oct. 2005.
  232. R. A. Gupta, Rajesh Kumar, Narendra Singh, Jogendra Singh, V.P. Santhosh, “Simulation and Analysis of Vector Controlled PMBLDC Based on MATLAB”, National Conference on Emerging Computational Techniques and Their Applications (ECTEA-05), M.B.M. Engineering College, Jodhpur, Rajasthan, INDIA, pp. 140-145, Oct. 2005.
  233. R.A. Gupta, Rajesh Kumar, Saurabh Malpani, “GA tuned PID controller for Induction Servomotor Drive Systems”, National Conference on Emerging Computational Techniques and Their Applications (ECTEA-05), M.B.M. Engineering College, Jodhpur, Rajasthan, INDIA, pp. 40-45, Oct. 2005.
  234. Sunita V. Malhara, R.A. Gupta, Rajesh Kumar, “Transient and Harmonic Analysis of Cage Induction Motor Drive fed from PWM Inverter”, National Conference on Emerging Computational Techniques and their Applications (ECTEA-05),M.B.M. Engineering College, Jodhpur, Rajasthan, INDIA, pp. 146-149, Oct. 2005.
  235. R.S. Rajawat, Sachin Goyal, Rajesh Kumar, R. A. Gupta, “Simulation and Analysis of Vector Control PWM fed Induction Drive”, National Conference on “Power Engineering Practices and Energy Management” (PEPEM’05), Thapar Institute of Engineering and Technology, Patiala, Punjab, INDIA, pp. 91-94, Jan. 2005. (Best Paper Award)
  236. Sachin Goyal, R.S. Rajawat, Rajesh Kumar, R. A. Gupta, “Harmonics Analysis of Various UPS Schemes”, National Conference on “Power Engineering Practices and Energy Management” (PEPEM’05), Thapar Institute of Engineering and Technology, Patiala, Punjab, INDIA, pp. 258-263, Jan. 2005.
  237. Rajesh Kumar, R.A. Gupta, Bhim Singh, “Performance Analysis Of Vector Controlled Permanent Magnet Synchronous Motor With Fuzzy Tuned PID Controller”, 11th International Conference on “Power Electronics and Motion control”, (EPE-EMC’2004), Riga, LATVIA, Sept.2004
  238. Rajesh Kumar, R.A. Gupta, Bhim Singh, “ PID Algorithm for Permanent Magnet Synchronous Machine Drive”, 18th National Convention of Mechanical Engineers (NCME), “Emerging Trends in Mechatronics for Automation” The Institute of Engineers, NIT Rourkela, INDIA, pp. 253-258, Nov. 2002.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s